My GE washer will agitate but won't spin. How can I fix this?

When your General Electric washing machine fills and agitates normally during the wash cycle but refuses to transition into the high-speed spin phase, it indicates that the motor and transmission are functional, but a drainage failure, door switch fault, or drive clutch issue is blocking extraction. Because GE washers feature a safety interlock that prohibits spinning while standing water remains in the tub, start by checking and cleaning the drain pump filter and ensuring the drain hose is clear. Next, test the lid switch or electronic door lock assembly to make sure it sends a closed signal to the control board; if the machine doesn't know the lid is closed, it won't spin. Finally, inspect the drive belt or shift actuator motor underneath the washer, as a broken belt or failed shifter mechanism prevents the transmission from engaging the spin basket.

When a GE washing machine successfully agitates and drains wastewater but refuses to enter the final high-speed spin cycle, it is usually caused by a slipping drive belt, a broken door latch switch, or a faulty mode shifter mechanism. To fix this, first unplug the machine, inspect the lower belt to ensure it is intact and gripping the pulleys, and test the lid switch with a multimeter to verify it registers a closed circuit. Verify success by running a manual drain-and-spin test and confirming drum rotation.