To reset your LG dryer, you can perform a power reset that clears temporary electronic glitches, error codes like d80, d90, d95, or tE, and control lock issues. First, turn the dryer off using the Power button and unplug it from the wall outlet or turn off the circuit breaker that supplies it. For electric dryers this is typically a double 30-amp breaker, for gas dryers a 120-volt outlet. Leave it unplugged for at least 5 to 10 minutes to allow capacitors on the main control board to fully discharge and reset. While it is unplugged, press and hold the Start/Pause button for 5 seconds to drain any residual power. Plug the dryer back in or turn the breaker back on, press Power, then run a test cycle on Normal or Time Dry for 10 minutes with no clothes to see if it heats and tumbles. If you have a specific error code, you can also reset via the control panel by pressing Power, then holding Control Lock or Child Lock for 3 seconds, or pressing and holding Start/Pause for 3 seconds. For persistent issues like no heat, check the thermal fuse, vent blockage, and lint filter, as a reset will not fix mechanical failures. If the error returns, consult the manual or call LG support.
1 votes
Marked as accepted