To adjust your water softener so that it produces softer water, you must reprogram its control valve to match your exact raw water hardness level. Step 1: Test your incoming unsoftened water using a digital total hardness test kit or check your local water report. Step 2: Convert the measurement into grains per gallon (gpg) by multiplying ppm by 0.0584. Step 3: Access your water softener's digital control panel settings menu and input this exact hardness number. Step 4: Adjust the regeneration frequency or reserve capacity if needed. Verification: Test water drawn from an indoor tap with a test strip to confirm hardness drops to zero.
1 votes
Marked as accepted