How to reset GE oven?

To reset GE oven to clear error codes, flashing display, and control board glitches for wall ovens like JTS5000SNSS and ranges like JB735SPSS, perform hard power reset. First, stop current cycle: press Cancel or Clear/Off button to stop any baking or self-clean cycle, open door to let oven cool if hot. Second, unplug oven or turn off breaker: for wall ovens and ranges, locate circuit breaker panel, turn off breaker that supplies oven, for electric GE ovens like JB735SPSS, turn off both breakers as they use 240 volts, for gas ovens, turn off 120-volt breaker and close gas valve behind range if needed. Third, wait at least 10 to 15 minutes to allow main control board and display board capacitors to fully discharge and clear memory and error codes like F2 for overheating, F3 for temperature sensor open, and F7 for control board failure, some technicians recommend pressing and holding Clear/Off button for 5 seconds while unplugged to drain residual charge faster. Fourth, restore power: plug back in or turn breaker back on, oven will beep and display may show PF for power failure or flashing clock. Fifth, clear display: press any button to clear PF and reset clock by pressing Clock button and setting time. Sixth, reset control lock: if display shows LOC or Lock and buttons not working, press and hold Lock or 9 and 0 buttons together for 3 seconds until light goes off. Reset clears electronic glitches but not mechanical failures like failed bake element.