To program a LiftMaster garage door opener, you use the Learn button on motor unit to program remote controls, keypads, and MyQ accessories. For remote control programming, locate Learn button on motor unit on ceiling, press and release Learn button, LED will light steady for 30 seconds indicating program mode, within 30 seconds press and hold button on remote you want to program until opener lights flash or you hear two clicks, indicating successful programming, then test remote. For wireless keypad programming, press and release Learn button, then within 30 seconds enter 4-digit PIN on keypad and press Enter, opener lights will flash indicating success. For MyQ smartphone control, press Learn button, then follow MyQ app instructions to add device, app will search and connect. For programming travel limits, use adjustment buttons on opener or MyQ app, set open and close limits by moving door to desired positions and saving. For Homelink in car, press Learn button on opener, then press Homelink button in car until lights flash. To erase all codes, hold Learn button for 6 seconds until LED turns off, erasing all remotes and keypads. Steps vary slightly by model, so consult manual for your specific LiftMaster model number like 8355W, 84505, or 8500W for exact instructions.
1 votes
Marked as accepted