How do I put my LiftMaster in program mode?

To put your LiftMaster garage door opener in program mode, you use the Learn button on the motor unit to enter programming mode for remote controls, keypads, and MyQ devices. First, locate the Learn button on your LiftMaster motor unit, which is mounted on ceiling of garage, typically near antenna wire and LED indicator, color varies, yellow, purple, red, orange, or green depending on model and year. To enter program mode for remote control, press and release the Learn button, the Learn LED will light steady for 30 seconds, indicating program mode is active. Within 30 seconds, press and hold the button on your remote control you want to program until garage door opener lights flash or you hear two clicks, indicating programming successful. For keypad, press Learn button then enter PIN on keypad and press Enter within 30 seconds. For MyQ, press Learn button then follow app instructions. To program travel limits and force, use adjustment buttons or MyQ app. To exit program mode, wait 30 seconds for LED to turn off or press Learn button again. If you hold Learn button for 6 seconds, you erase all codes and exit program mode. Consult manual for your specific LiftMaster model as steps vary slightly between models.