What is the common problem with Samsung dryers is not heating or not drying properly, often due to heating element failure, thermal fuse blown, or clogged vent causing overheating. Many Samsung dryer owners report dryer runs but produces no heat, leaving clothes damp, with error codes HE, hE, or HC indicating heating error. Heating element coil DC47-00019 can break after 2 to 4 years of use, especially with frequent high heat, replacement costs $30 to $50 DIY. Second common problem is thermal fuse blowing due to clogged lint filter or vent duct, causing dryer to not start or not heat. Third common is loud squeaking or thumping noise from worn drum rollers, idler pulley, or belt needing replacement. Fourth is control board failure causing dryer not to start or random shut off. Fifth is moisture sensor dirty with fabric softener residue causing dryer to think clothes dry when still damp. Most common is heating issue, fixable by cleaning vent yearly, cleaning lint filter after each load, and replacing heating element. Prevent by not overloading and ensuring vent duct not kinked. This problem is widely reported in reviews but fixable.
1 votes
Marked as accepted