To put a standard Leviton smart Wi-Fi or Zigbee switch into network pairing mode, ensure the device is powered on, then press and hold the top or rocker paddle switch continuously for approximately 7 seconds. Watch the small LED indicator light on the front faceplate; initially it will illuminate amber. Continue holding the paddle until the status indicator light begins flashing green and amber alternately. Once this rapid alternating flash pattern appears, release the paddle, as the switch is now actively broadcasting its setup network and ready to pair with your mobile app. Verification: Open your smart home application on your smartphone to confirm that the device is successfully discovered and ready to complete the final configuration steps.
1 votes
Marked as accepted