Performing a complete factory hard reset on a Leviton smart switch to wipe all stored user data and network pairing profiles requires a manual button sequence. Ensure the switch is powered on, then press and hold the top or rocker paddle continuously. After approximately 7 seconds, the status LED will glow amber. Continue holding the paddle down without releasing it. After another 7 seconds (about 14 seconds total), the LED will begin flashing red and green alternately. Immediately release the paddle, and the device will automatically erase its memory and reboot into initial setup mode. Verification: Open your mobile app to confirm the device has disappeared from your network and its LED pulses green, indicating it is ready for fresh pairing.
1 votes
Marked as accepted