Making a Leviton smart switch discoverable for app pairing requires putting the device into its manual broadcast mode. Ensure the switch is powered on and operating normally, then press and hold the top or rocker paddle continuously for approximately 7 seconds. Watch the status LED indicator light closely; it will initially glow amber. Continue holding the paddle until the indicator light starts flashing green and amber in a rapid alternating pattern. Once this specific flash sequence begins, release the paddle immediately, as the switch is now actively broadcasting its wireless setup network. Verification: Open the My Leviton app on your mobile device and verify that the switch appears automatically in the available pairing discovery list.
1 votes
Marked as accepted