Fixing a GFCI outlet that refuses to latch in the RESET position requires checking for active faults and wiring errors. First, unplug all connected appliances from the receptacle and any downstream outlets. Go to your main electrical panel and turn off the branch circuit breaker for 10 seconds, then restore power and try pressing RESET. If it still pops out, turn off the breaker again, pull the outlet from the wall box, and ensure incoming power wires are connected to the terminals labeled LINE rather than LOAD. Verification: Test voltage across the line terminals with a multimeter; if power is present but the latch fails, replace the unit.
1 votes
Marked as accepted