How do you reset a Samsung dryer to clear error codes and fix glitches, several methods work for most models. Simplest method is power reset, unplug dryer from wall outlet or turn off circuit breaker at electrical panel for 5 to 10 minutes to allow control board to fully discharge and clear temporary memory, then plug back in or turn breaker on and press Power button to turn dryer on, this resets electronics and often fixes errors like 9C1 power error or random shut off. Second method is control panel reset, with dryer on press Power to turn off, then press and hold Start Pause button for 5 seconds, then press Power again to restart. Third method is diagnostic reset, enter diagnostic mode by pressing and holding Mixed Load Bell and Wrinkle Prevent buttons simultaneously for 3 seconds or Temp and Time buttons for 3 seconds until display shows t1, then press Power to exit which clears stored codes. For thermal fuse trip due to overheating, after cleaning vent duct, unplug dryer, remove back panel, locate thermal cutoff near heating element housing, press small reset button if present, then reassemble. Always clean lint filter and vent before resetting to prevent overheating again.
1 votes
Marked as accepted