To program your Craftsman garage door opener, you use the Learn button on motor unit to program remote controls, keypads, and MyQ devices, as Craftsman openers are made by Chamberlain Group and programming is similar to Chamberlain and LiftMaster. For remote control programming, locate Learn button on motor unit mounted on ceiling of garage, near antenna wire and LED indicator, color varies yellow, purple, red, orange, green, press and release Learn button, LED will light steady for 30 seconds indicating program mode, within 30 seconds press and hold button on remote you want to program until opener lights flash or you hear two clicks indicating success, then test remote. For wireless keypad programming, press Learn button, then within 30 seconds enter 4-digit PIN on keypad and press Enter, opener lights flash indicating success. For MyQ smartphone control, press Learn button then follow MyQ app instructions to add device. For Homelink in car, press Learn button on opener, then press Homelink button in car 2 to 3 times until lights flash. To erase all codes, hold Learn button for 6 seconds until LED turns off. Steps vary slightly by Craftsman model number like 139.53985, 139.30437, so consult manual for your specific model for exact instructions. So programming involves Learn button on motor unit and remote button within 30 seconds.
1 votes
Marked as accepted