To connect your Craftsman garage door opener, you need to connect power, safety sensors, wall control, and program remotes and MyQ if supported. First, install opener per manual, mount motor unit on ceiling, install rail and trolley, connect to power outlet, ensure outlet has power. Second, install safety sensors at bottom of door tracks, wire sensors to motor unit terminals, ensure sensors aligned with steady LED lights, not blinking. Third, install wall control inside garage, wire to motor unit. Fourth, program remote controls, press Learn button on motor unit, LED lights steady for 30 seconds, within 30 seconds press remote button until lights flash. Fifth, program keypad if present, press Learn button then enter PIN on keypad and press Enter. Sixth, connect MyQ smartphone control if your Craftsman model supports MyQ or you have MyQ add-on, download MyQ app, create account, press Learn button on opener, follow app instructions to add device, ensure WiFi signal strong in garage, MyQ requires 2.4 GHz WiFi. Seventh, set travel limits and force, use adjustment buttons on motor unit or MyQ app to set open and close limits. Eighth, test operation with remote, wall button, and MyQ app. If Craftsman opener is older without MyQ, you can add MyQ Smart Garage Hub. Consult manual for your specific Craftsman model number for detailed connection steps.
1 votes
Marked as accepted