How do I reset my GE refrigerator control panel?

To reset your GE refrigerator control panel to clear error codes, flashing temperatures, and electronic glitches, perform hard power reset and control lock reset. First, hard power reset: press and hold Lock or Power button if available, then unplug refrigerator from wall outlet behind fridge or turn off circuit breaker that supplies it, wait at least 5 to 10 minutes to allow main control board and display board capacitors to fully discharge and clear memory and error codes like PF for power failure, some technicians recommend opening doors for 30 seconds to help discharge, then plug back in. Refrigerator will beep and display may show PF or flashing 37 degrees fridge and 0 degrees freezer, press any button to clear and reset temperatures to recommended 37 degrees fridge and 0 degrees freezer by pressing Fridge and Freezer buttons. Second, reset control lock: if control lock light on and panel not responding, press and hold Lock button for 3 seconds until light goes off, on some models press and hold Water and Light for 3 seconds. Third, reset ice maker: locate ice maker power switch or press and hold ice maker test button under ice maker for 3 seconds until ice maker cycles. After reset, wait 24 hours for temperatures to stabilize and check if cooling. Reset clears electronic glitches but does not fix mechanical failures like failed compressor or fan motor that require part replacement. Use surge protector to prevent future board failures.