Is there a reset button on a KitchenAid refrigerator?

There is no dedicated physical reset button on your KitchenAid refrigerator like a small red button you press, but you can reset it through power cycling and control panel combinations that clear error codes and control glitches for models like KRFF507HPS and KRFC300ESS. The universal reset method is hard power reset: open doors and note temperature settings, then unplug refrigerator from wall outlet behind fridge or turn off circuit breaker that supplies it, wait at least 10 to 15 minutes to allow main control board and display board capacitors to fully discharge and clear memory and error codes like PO for power outage, press and hold Power or Energy Saver button for 5 seconds while unplugged to drain residual charge faster, then plug back in or turn breaker back on. Refrigerator will beep and display may show PF for power failure, press any button to clear and reset temperatures to 37 degrees for fridge and 0 degrees for freezer. Second method is control panel reset: for some KitchenAid models, press and hold Lock and Water buttons together for 3 seconds to reset dispenser, or press and hold Power and Water buttons for 5 seconds to enter diagnostic mode that clears codes. A reset clears electronic glitches but does not fix mechanical failures like failed ice maker at 50 to 150 dollars, evaporator fan at 50 to 100 dollars, or compressor at 400 to 600 dollars that need part replacement.