Lighting a modern Rheem Performance gas water heater equipped with a continuous pilot or electronic control valve requires careful adherence to safety protocols. First, remove the outer inner combustion chamber cover and turn the gas control knob to the "Off" position, waiting at least five minutes to allow any residual gas to dissipate safely out of the room. Next, rotate the dial to the "Pilot" position, depress the control knob or pilot button fully, and click the piezo igniter button repeatedly until you see or hear the pilot flame ignite through the sight glass. Continue holding the button down for roughly thirty to sixty seconds to let the thermocouple heat up, release it to ensure the flame stays lit, and finally turn the dial to the "On" position.
1 votes
Marked as accepted