How to run diagnostics on Amana washer involves entering diagnostic mode via button sequence to check error codes and test components, with procedure varying by model but generally for Amana washers made by Whirlpool, turn dial to off, then turn dial 3 clicks clockwise, 1 click counterclockwise, 1 click clockwise to enter diagnostic mode, then press Start to cycle through tests, with washer running test cycle checking fill, agitate, drain, spin, and displaying error codes like F21 drain and F20 fill, and for Amana top load washers with electronic control, press and hold Wash Temp and Soil Level buttons together 3 seconds to enter diagnostic. Diagnostic mode tests water inlet valve, wash motor, drain pump, and lid switch. To exit diagnostic, press Power or unplug 5 minutes. So run diagnostics on Amana washer by turning dial sequence to enter diagnostic and test components and read error codes, consulting manual for specific model diagnostic steps as sequence varies slightly by model year and control type.
1 votes
Marked as accepted