How to hard reset Samsung dishwasher involves power cycling to reboot control board and clear error codes like LC for leak, 4C for water supply, and 5C for drain, with steps including turning off dishwasher using Power button, unplugging dishwasher from wall outlet or turning off circuit breaker supplying dishwasher for 5 to 10 minutes to allow capacitors to discharge and memory to clear, pressing and holding Power button while unplugged for 5 seconds, then plugging back in or turning breaker on, and running empty normal cycle to test. Some models can be reset by pressing and holding High Temp Wash and Lower Rack or Smart Control button for 3 seconds until display resets. For error LC indicating leak detected, check under dishwasher for water, dry leak sensor at base, then reset power. For control panel frozen, hold Start button for 3 seconds to cancel. Hard reset can fix issues like not starting, display frozen, and false error codes. If reset does not fix, check manual for specific error troubleshooting or call Samsung support.
1 votes
Marked as accepted